The module exhibits interaction with Saferoute - aggregator services for online stores.
Saferoute is:
14 delivery services in one service, a simple and convenient personal account, the possibility of preliminary calculation of the shipping tariff, the provision of fulfilment services.
Delivery to the door in more than 65,000 settlements, more than 140,000 points of issue. Shipping delivery services occurs daily, due to which you save on Fulfilment. The service does not require prepayment or monthly payments. All interactions with Saferoute delivery services takes over.
Customers are given the opportunity to choose the most suitable options for cost, timing or delivery method, while saving up to 30% by discounts from direct delivery service rates.
The module supports a basket widget. Later will also be developed a card widget.
Scope of application
Suitable for marketers interacting with Saferoute.
During the order, the buyer chooses the shipping method with the calculated Saferoute tariff and then one of the most convenient options for it: delivery by courier, pickup, Russian post office, etc.
To work correctly, you need to install the "SEO" CS-Cart module.
Note! For the correct operation of the module, the delivery options must be specified!
1. After installing the module, go to the "Modules" tab, in the drop-down menu, select "Management Modules" and "MaurisWeb".
2. In the list that opens, select the module you are interested in and click on its name highlighted in blue or black.
3. Run down below, select the "Basic Settings" section and check the "Save Data Data Removing" item in order not to lose them when reinstalling the module.
4. Go to the "Getting Started" tab and proceed according to the instructions.
5. Go to the "Settings" tab. Expand the optional menu in the "Length Unit in your system" and select one of the proposed values: "mm", "cm", "M".
6. In the cash on payment methods of cash on delivery ", select one of the proposed methods. For example: "Bank card", "Establish", "Discuss on", Sberbank, "Yumoney P2P", "Qiwi", "Webmoney", "online loan". To select more than one record, press the left mouse button on the record by holding the Ctrl key. To remove the selection, press the left mouse button on this entry by holding the Ctrl key.
7. In the Cash Plaster Methods Point item, select one of the proposed methods. For example: "Bank card", "Establish", "Discuss on", Sberbank, "Yumoney P2P", "Qiwi", "Webmoney", "online loan". To select more than one record, press the left mouse button on the record by holding the Ctrl key. To remove the selection, press the left mouse button on this entry by holding the Ctrl key.
8. In the "Maximum Number of Auto Filling Cities" Point, enter the number of cities for choosing when placing an order on the shop window.
9. Go to the "Goods" tab. In case the goods are stored in the Saferoute warehouse, you can resolve them to send. To do this, leave a tick in the appropriate paragraph or remove to prohibit the shipment.
10. To send goods on behalf of Marketplayer, check the box in the appropriate paragraph.
11. Put the checkbox in the "Send previously sent goods to the Calculation of the delivery cost" to be able to add to the order items while the cost is calculated.
12. Go to the "Orders" tab. Enter the prefix to the order number.
13. Enter divide the order numbers.
14. Go to the "Actions when changing status". In the "Confirmation" point, expand the Additional Menu and compare the statuses.
15. In the "Cancel" point, expand the additional menu and match the statuses.
16. In the "Duplication" point, expand the optional menu and match the statuses.
17. In the "Registration of Returns", expand the additional menu and compare the statuses.
18. Go to the "Widget in Chekout" tab. To hide a step of payment, check the box in the appropriate paragraph.
19. To reflect only the delivery of the delivery, check the box in the appropriate paragraph.
20. Go to the "Tracking Widget" tab. To immediately display the order number field, check the box in the appropriate paragraph
21. In the "What an immediate tracking will be made" Expand the additional menu and select how to track the tracking: "Not selected", "Order order ID", "Order ID", "Track number in the delivery service".
22. Go to the "Cash" tab. To cache the author's auto filter data, check the box in the appropriate paragraph.
23. To cache calculate the cost, check the box in the appropriate paragraph..
24. In case you changed the Saferoute personal account settings or the settings of the module itself and they work incorrectly, click on the White Clear Cache button to clean the cache.
25. Go to the "Logging" tab and select the Logging Type: "Not Selected", "File System", "Database".
26. Go to the "Profile fields" tab and select the phone from which profile field will be taken (this item is required by Saferoute).
27. Go to the "CRON" tab and make the desired CRON commands in the scheduler.
28. Go to the Contacts tab. This contains information about the contacts and technical support for Saferoute and Maurisweb.
29. Save the module settings by clicking on the blue "Save" button on the upper right side of the screen.
1. To configure privileges, go to the "Buyers" tab and select "User Groups".
2. Select the desired group and click on its name highlighted in blue.
3. Go to "MW: SAFEROUTE" and select Access Rights: "Full Access", "Only View", "No Access".
4. Save the changes. By clicking on the blue button "Save" in the lower right corner of the panel.
1. For the primary setting of CMS SAFEROUTE, you must turn on the showcase (in case you work in test mode and the showcase is initially turned off!). To do this, go to the "Administration" tab and select "Showcases".
2. Switch the switch in the "Status" column.
Please note that after setting the showcase, you must turn off!
3. To configure Saferoute, go to the "Modules" tab, select "SAFEROUTE" and "Settings".
4. Go to the "General" tab. Fill in the "Login" and "password" items, click the "Authorine" button. It will take full synchronization with Saferoute.
5. Go to the "Orders Synchronization" tab. Copy the link allocated by gray and go to the Saferoute Personal Cabinet by clicking on the "Saferoute Personal Cabinet settings" highlighted in blue, according to the prompt.
6. The Saferoute Personal Cabinet will open. Go to the "Basket Widget" tab and select the "Basic Settings" section.
7. Go to the "API" tab and paste the copied link in the "path to the API CMS" field and press the Save Changes button in the bottom right corner of the window.
8. Go to the "Basket Widget" and "CMS Settings" tab. Do not forget to turn on the showcase (p.1-2 of this section)!
9. Navigate to the "Status Compliance" section and compare the statuses.
10. After all statuses are mapped, press the "Save Changes" button in the bottom right corner of the window.
11. Return to the admin panel and click on the Blue "Save" button in the upper right corner of the panel to save the changes.
12. Do not forget to turn off the showcase (if you work in test mode and the showcase is originally turned off)!
1. To apply the shipping Saferoute, you need to create an appropriate delivery method. To do this, go through "Administration", select the section "Delivery and Taxes" and "Delivery Methods".
2. Click on the blue button with a plus sign in the upper right corner of the panel.
3. Enter the name of the new delivery method and in the "Calculation of the Tariff" deploy an additional menu and select "SAFEROUTE".
4. To save the changes, click on the Blue "Create" button in the upper right corner of the panel.
5. A new shipping method will reflect in the overall list. Here it can be edited, delete, turn on and off. To edit the shipping method, click on its name highlighted in blue.
6. Go to the "Configure" tab. Here, specify additional delivery services and additional packaging services, marking them with checkmarks. After making changes, click on the blue "Save" button in the upper right corner of the panel.
This functionality is used if the goods are stored in the Saferoute warehouse (fulfilment services are provided).
1. Saferoute can be customized for individual goods. To do this, go to the "Goods" tab and select "Goods".
2. Highlight the goods and click on the "Actions" button. Select the "Send Selected Products in Saferoute" function and one of the options: "Only new", "update existing" or "Create new update existing".
3. To apply the capabilities of Saferoute for several goods, mark them and click on the button in the shape of the gear in the upper right corner and select the "Send Items in SafeRoute" and options or "Send Foundations found in Saferoute" and its options (if a search ).
1. Press the button in the form of a product basket in the upper left corner to go through the showcase.
2. Add the goods to the basket and click on the "Order" button.
3. When placing an order, the city will be filled automatically.
4. The list will appear a new shipping method of Saferoute and its various options.
5. Select the most convenient way and click on the "Confirm" button.
6. Click on the green button "Order Details".
7. In order details, go to the "Delivery Information" tab. Here will be able to track the order.
1. After placing the order, its details can be changed. Go to the "Orders" tab and select "All Orders" section.
2. The order status can be changed by clicking on it and selecting the desired status.
3. You can also change delivery methods for multiple orders. To do this, select them, click on the "Action" button and select the "Send selected orders in Saferoute" function and one of its options.
4. You can also conduct a group change of statuses by selecting the "Run Action for Selected Orders to Saferoute" and one of the options.
5. Inside the order "SAFEROUTE" will be listed as a payment method and carrier.
6. You can also change the delivery option. To do this, click on the button in the shape of the gear in the upper right corner of the panel and select the "Edit Order" function.
7. In the "Status" section, click on the "Select Other" button backlit.
8. A window will open in which you can change the delivery option.
